TOP 5 processors for GTX 1060 - rating of processors that will reveal the video card

In order for a computer with a GeForce GTX 1060 video card to handle games and other tasks, you need to assemble it correctly. First, you will need to decide which processor such a discrete disc is best suited for. Here are the 5 coolest “engines” from Intel for it. Comparing key characteristics will help you find the right model.

i3-8100

The king of inexpensive builds in the eighth generation. The processor performs well in all modern games, and therefore is one of the best solutions for desktop builds in conjunction with the GTX 1060. This option is recommended as an inexpensive “engine” that reveals such a video card.

Key characteristics and features
Decent performance	4 full-fledged physical cores (and the same number of threads), operating at a frequency of 3600 MHz, 6 MB third-level cache
Low cooling requirements	The heat dissipation rate is 65 W. This option allows you to use the fan that is included with the “boxed” version of the processor and save on cooling.

It is worth noting that the processor multiplier is not unlocked, so it will not be possible to overclock it. However, gamers speak very flatteringly about it.

Interesting - PC or console: 7 arguments in favor of each option

Difference between 6 GB and 3 GB versions

Now we know that there will also be a 3 GB version. So will the new card differ only in memory capacity? No. This card uses the GP160-300-A1 chip, while the version with 6 GB of video memory is equipped with the GP106-400-A1 chip. This card has fewer stream processors and other computing units, since 1 cluster out of 10 is disabled here. Apparently, the company has accumulated a lot of defective chips per cluster, which contributed to the decision to release a 3 GB version. And of course, the price will differ. The 3 GB version will cost $149 instead of $249.

i5-7500

A worthy representative of the Kaby Lake line in the recent past was considered a pre-top solution. This model is recommended as one of the best options for the GTX 1060. Its parameters allow you to reveal the video card to its fullest.

What's good:

High performance and stable operation. It has four cores that operate at a frequency of 3.4 gigahertz. Like the previous option in the rating, the processor boasts a six-megabyte third-level cache.
Low level of energy consumption and heat dissipation. This will help you save money: you don’t need an additional cooling system; you can use your “native” cooler.
It supports up to 64 gigabytes of RAM, which makes it possible to work on the same processor for a long time.
Even on the integrated graphics it supports 4K display. In addition, you can connect three monitors: it will be easier to work with graphics programs.

Useful: TOP 5 best HDDs for 2 TB - Rating of internal hard drives for 2000 GB

The reason for the “processor dependence” of video cards

In fact, from the point of view of hardware capabilities, there is no dependence between the speed of the video card and the CPU. Both devices operate at standard speeds with standard interfaces and exchange data in exactly the same way.

Problems arise when programmers get down to business. Insufficiently optimized code, too cumbersome memory operations, and use of outdated techniques - all this leads to the fact that one of the devices in this tandem (most often the CPU) begins to “slip”.

That is why, when talking about the dependence of video chip performance on the CPU chip, they always mention in which application it manifests itself. Among gaming applications, there are practically no ones in which performance would not completely depend on the CPU, but would be provided by the adapter.

Attention! The libraries used for working with 3D graphics also play an important role. Thus, applications that use DirectX are much more processor-dependent than those that use OpenGL.

i5-7640X

This is already the second option in the list of models that the GeForce GTX 1060, which belongs to the 7th generation, is suitable for. It is also quad-core, but, in comparison with the previous processor in the rating, it works faster. Here the cores “work” at a frequency of 4000 MHz.

What features does it have:

TDP power - 112 W. This is enough to avoid having to buy additional fans.
Unlocked multiplier: the user can overclock the processor, which will give a performance boost.

Recommendation : if you need to overclock the device, you should still stock up on additional cooling.

In conjunction with the GTX 1060 it provides stable high FPS. Judging by the reviews, in comparison with the i5 7600K, this option wins without a fight.

On topic: Types of monitors - what types of monitors exist: 7 types of screens

What is the difference between i5 and i7 for laptops?

i5 processors

used in economy class systems.
i7
's support for technology such as Hyper-Threading.
It gives the core the potential to handle multiple threads, allowing a quad-core i7
to have the performance of 8 cores!

Interesting materials:

Where can I file a complaint against the police? Where was Pyotr Grinev sent to serve? Where will you go on vacation in the summer? Where do tits move in winter? Where are Word documents saved by default? Where to file an appeal regarding the Unified State Examination? Where to apply for a patent? Where does the SSD drive connect? Where to connect headphones with a microphone? Where to go with children near Moscow?

i5-8600

The six-core, six-thread crowd favorite is essentially a modern analogue of the Core i7 Kaby Lake. This is a good option that can reveal the GeForce GTX 1060. Its attractive characteristics make it one of the best processors in the rating.

Note : the TDP declared by the manufacturer is 65 degrees, so, in principle, it is not necessary to buy coolers. However, users are still advised to stock up on additional cooling if you need to build a PC to work with resource-intensive programs and games.

Attractive options:

Typically the cores operate at 3.1 GHz, which is already good. And in “Turbo” mode this figure increases to 4.3 GHz. Excellent performance in games without freezes and other similar irritants (especially if you take the GTX 1060 for it) are guaranteed.
Supports Hyper-Threading - another nice feature. The implementation of simultaneous multi-threading allows the processor to quickly process many operations in demanding open-world games, and demonstrate stable operation when using resource-intensive professional software, be it video processing or studio-level sound recording.
Allows DDR4 RAM to operate in dual-channel mode, which also adds points to performance.

Disadvantage : not intended for overclocking.

See also: TOP 10 best SSDs for 120-128 GB

conclusions

In this article we have looked at the best processors for the gtx 1060. As you can see, you have plenty to choose from. If your budget allows, then you can take the Intel Core i5 8400. Otherwise, pay attention to Ryzen, for the same performance it costs much less. What kind of processor do you think is needed for the gtx 1060 6gb? Write in the comments!

No related photos.

Rate this article:

( 5 ratings, average: 4.20 out of 5)

Tweet Pin It

about the author

Author:
Sarfraz

Original:

https://www.xtremegaminerd.com/best-cpu-for-gtx-1060/

Translator:

admin

Administrator of te4h.ru, interested in new technologies, cryptocurrency, artificial intelligence, free software and Linux.

Reduced energy consumption

The cost of electricity also means a lot to people involved in mining. Especially for those in whose region using electrical energy to power a farm is expensive. In this case, and even in others, it is possible to reduce the power consumption of the video card due to downvolting.

Power limit - 80%

As power consumption decreases, the hashrate will also decrease. But on the other hand, it decreases much less relative to the decrease in power consumption. For example, by reducing energy consumption by 20%, the hashrate will decrease by only 0.2 MHS/s. Even regions with average electricity prices are subject to significant energy costs, and it makes sense for people living in these regions to reduce their power consumption as well. In addition, this will reduce the temperature of the GPU.

Considering that a hashrate in the range of 23.5-24.7 MHS/s is enough, and the amount of consumption is only 80 Watts, downvolting is a profitable solution for almost all farm owners.

Battlefield V (2018)

Minimum and average FPS. Battlefield V

In Battelfield V, the processor and video card work at almost 100%.

In rare events, the GTX 1060 showed a poor result of 19 frames. And this is a problem with the video card. Since on the RX 580 8Gb this figure is almost twice as high.

The problem was RAM. Because it is filled to 7Gb, which in fact is completely full of memory. The remaining RAM resources go to the operating system.

Battlefield V uses about 9Gb of RAM.

The game can be played on ultra settings, but minor freezes are possible. Here the 1060 3Gb showed poor results for rare events. Average FPS is within normal limits and quite playable.

Computer configuration after overclocking

CPU : AMD FX 6300 4.2GHz (stock 3.5GHz with turbo boost up to 3.6GHz)
CPU/NB : 2600MHz (stock 2000MHz)
HT : 2400MHz (stock 2000MHz)
RAM : 2133 (stock 1866MHz)

Read how to overclock the FX 6300 in this guide. It contains a detailed description of each stage of overclocking, as well as video instructions with tests.

Let's start testing...

About gaming performance

Some test data on FPS. Measurements were carried out at a screen resolution of 1920x1080.

p, blockquote 14,0,0,0,0 –>

Battlefield 1

p, blockquote 15,0,0,0,0 –>

Pentium G5400 - 50;
Core i3 8100 - 65;
i5 8400 - 84;
Ryzen 5 2600 from AMD - 80.

The Witcher 3

p, blockquote 16,0,0,0,0 –>

Pentium G5400 - 63;
Core i3 8100 - 72;
i5 8400 - 90;
Ryzen 5 2600 from AMD - 95.

Far Cry New Dawn

p, blockquote 17,0,0,0,0 –>

Pentium G5400 - 45;
Core i3 8100 - 60;
i5 8400 - 82;
Ryzen 5 2600 from AMD - 77.

SIMS 4

p, blockquote 18,0,0,1,0 –>

Pentium G5400 - 75;
Core i3 8100 - 87;
i5 8400 - 96;
Ryzen 5 2600 from AMD - 102.

Fallout 4

p, blockquote 19,0,0,0,0 –>

Pentium G5400 - 60;
Core i3 8100 - 76;
i5 8400 - 79;
Ryzen 5 2600 from AMD - 92.

The games for the test were selected randomly. I would also like to remind you that even an effective selection of components does not guarantee ideal operation of applications - much depends, among other things, on how the developers optimized the code.

p, blockquote 20,0,0,0,0 –>

This often happens, including in the case of heavily promoted and hyped video games. In most cases, all “jambs” are eliminated after several patches, but this does not always happen. Some series suffer from chronic “sores” that are repeated from release to release due to the peculiarities of the engine.

p, blockquote 21,0,0,0,0 –>

There is no point in upgrading your computer, since most often the effect will be minimal. Yes, there may be some increase in FPS, but you won’t be able to get the maximum, since it’s not a matter of the computer at all.

p, blockquote 22,0,0,0,0 –>

You may find the amd ryzen 5 3600, i5 9400 and i3 9100 processor reviews useful . I would be grateful to everyone who shares this publication on social networks. See you soon!

Price. Reviews

Currently, you can purchase the product we are considering for 9,000-10,000 rubles. In the first case, the accelerator will operate in nominal mode with basic performance. If you fork out 10,000 rubles, you can buy a more overclocked video card with a higher operating speed. An example is an accelerator with a Gaming console from the MSI GTX 1050 Ti model range. What kind of processor is needed in this case? Experience shows that i5 or Ryzen 5 are more preferable. They have faster performance, which will allow you to unleash the potential of the video adapter.

Performance and Positioning

NVIDIA positions this model with the motto: “The power of the GTX 980 for every gamer.” The new video card will receive all the technologies that were presented for Pascal, such as the new 16 Nm process technology from TSMC, GPU Boost 3.0, NVIDIA Ansel, NVIDIA VRWorks Audio, etc. (details about these technologies are available in the links). Thanks to all this, the video adapter will be perfect for VR.

The press release stated that in many popular games (BioShock Infinite, Crysis 3, Grand Theft Auto V, Rise of the Tomb Raider, Star Wars Battlefront, Witcher 3, Ashes of the Singularity, The Division) the GTX 1060 is on average 15% faster and 75% more economical than its main competitor, the AMD Radeon RX 480, comparison was made at base frequencies. But AMD has the advantage in price.

As for the 3 GB version, it is made to compete with AMD pre-tops, i.e. with Radeon RX 480 and Radeon RX 470, this version will have a lower price.

It has also now become known that the FE (reference card) is well driven to the psychological value of 2 GHz. At the same time, the chip temperature is only 74°C, and the turbine rotation speed is 61% of the maximum.

Comparison with competitors and members of the Pascal generation

Here we will present you with a table where we compare the new model with competitors in the form of Radeon RX 480 and GTX 980 and other Pascal representatives (GTX 1070, GTX 1080, TITAN X).
We also recommend looking at the mobile version of the GTX 1060 in laptops. Comparison table for GTX 1060

RX 480	GTX 980	GTX 1060 (3GB)	GTX 1060	GTX 1070	GTX 1080
Chip	Polaris 10XT	GM204	GP106	GP106	GP104	GP104
Technical process	14 Nm FinFET	28 Nm	16 Nm FinFET	16 Nm FinFET	16 Nm FinFET	16 Nm FinFET
Transistors, billion	5,7	5,2	4,4	4,4	7,2	7,2
Stream processors	2304	2048	1152	1280	1920	2560
Core frequency, MHz	1120(1266)	1126(1216)	1506(1708)	1506(1708)	1507(1685)	1607(1733)
Memory	4/8 GB GDDR5	4 GB GDDR5	3 GB GDDR5	6 GB GDDR5	8 GB GDDR5	8 GB GDDR5X
Bus width, bits	256	256	192	192	256	256
Effective memory frequency, MHz	8000	7012	8000	8000	8000	10000
Memory bandwidth, GB/s	256	224	192	192	256	320
Nutrition	6 pin	6 + 6 pin	6 pin	6 pin	8 pin	8 pin
TDP, W	150	165	120	120	150	180
Performance, GFLOPS (FP32)	5161	4612	~3470	3855	5783	8228
Price at the time of release	200$/230$	550$	$150	250$	380$	600$

The Witcher 3: Wild Hunt (2015)

Minimum and average FPS. The Witcher 3: Wild Hunt

The Witcher 3 shows quite playable gameplay at maximum graphics settings. 1%Low is already at critical values, but it’s comfortable to play and the game doesn’t freeze.

In Witcher 3: Wild Hunt with 1060 3Gb the processor is loaded at 60% - 100%. The video card is 100% loaded, and the RAM is 5.0Gb. FPS is limited by the video card, but you can play.

3Gb of video memory 1060 does not create a problem. The game uses up to a maximum of 2.5Gb at maximum settings.

To get 60 FPS you need to set the graphics settings to medium.